Safe Narrow Frame Disassembly SpecificationsAdopt cyclic low-temperature heating under 85°C to soften frame adhesive evenly. Insert plastic shims no deeper than 1mm along frame gaps, operate slowly near bottom flex concentration area. Protect built-in cellular antenna for A2568/A2569 models during separation to avoid signal failure.
Five Common Post-Replacement Touch Faults & SolutionsEdge dead touch from overflow OCA glue; screen warping caused by uncleaned residual adhesive; intermittent touch from over-bent flex; ghost touch without copper shielding; blurred camera from lens dislocation. Follow standardized fitting flow to avoid all defects.
Mini Series Digitizer Wholesale AdvantagesAll Mini 6 cover glass pre-laminated high-transmittance G+OCA film, no manual glue coating needed. Optional copper foil version suppress charging interference flicker. Mixed batch with Mini 4/Mini7 touch glass acceptable for small wholesale orders.
