1. Narrow Frame Safe Disassembly Tips
Set constant heating temperature and use cyclic heating to soften adhesive evenly. Insert thin shims no more than 1mm deep along the frame gap. Slow down near the bottom flex and antenna area. For the cellular version A1550, pay extra attention to the right-side built-in antenna to avoid damage.
2. Top 5 Post-repair Faults & Prevention
Edge dead touch is caused by overflowed adhesive; control glue range during installation. Screen warping results from residual old glue; clean the frame thoroughly. Over-bent flex leads to intermittent touch; reserve enough bending space. Low-quality digitizers cause ghost touch; stick to qualified bulk parts. Misaligned camera lens leads to black screen after pressing.
3. Small-size iPad Wholesale Part Requirements
Mini series digitizers need precise cutting for narrow frames. The flex cable must be soft and durable for repeated assembly. Uniform product quality and compact shockproof packaging are necessary for long-distance transportation and bulk inventory.digitized screen o